PCM80, PCM81, PCM90, PCM91

Identical dimensions, mounting, pinout, and specifications.

Once installed, simply connect the two Lexicon connectors.

L’article PSU for PCM80,PCM81,PCM90,PCM91 est apparu en premier sur LABO K EFFECTS.

Minimum housing height = 2U

Available as a complete kit or Built and tested.

Select your option

L’article Trident 65 PSU Kit est apparu en premier sur LABO K EFFECTS.

This kit allows you to adjust the amplification gain of the TELEFUNKEN V672 preamps.

This allows you to adjust the preamp gain to the power of the source used.

A high quality 12 position selector switch allows you to choose the preamp gain.

The 12 gain values are:

0dB, 5dB, 10dB, 15dB, 20dB 22dB, 24dB, 26dB, 28dB, 30dB, 32dB, 34dB.

L’article V672 Gain Selector est apparu en premier sur LABO K EFFECTS.

Each output has its own volume control.

Suitable for Neve series 54 consoles and others

power supply is taken from the console (+/-15V to +/-18V)

Wiring via ribbon cable

Outputs on Sub-D 25 connector

L’article 8 channels direct output board est apparu en premier sur LABO K EFFECTS.

This kit allows to interconnect one NEVE V series preamp module and one equalizer module to put them in a Rack. The kit also allows to connect inputs, outputs and power supply necessary for the use of the set.

The "plug and play" design of this kit is usefull to verify the proper operation of modules before moving on to the racking

Available as PCB, complete kit or Built and tested.

Select your options

L’article Neve V3/VR RACKING KIT ISSUE 3 est apparu en premier sur LABO K EFFECTS.

Balanced or unbalanced input.

12V to 24V power supply

L’article Vu meter driver est apparu en premier sur LABO K EFFECTS.

The warmth of this legendary equalizer available in hardware.

The input and output are balanced at the line level. The compatibility with the 51X format allows the equalizer to operate with -/+18V tensions as on the console thanks to the regulators on the board.

The EQ81 is a stand-alone unit, but it can also be combined with the PRE81 to form a preamp+EQ channel simply by pressing the CH (channel) button

Complete KIT

L’article EQ 81 DIY by Labo ★ K effects est apparu en premier sur LABO K EFFECTS.

The warmth of this famous preamp available in 500 format.

Mic and line inputs, HiZ Instrument input on front panel, Output volume.

High cut and low cut sweeping filters.

Complete KIT

L’article PRE 81 DIY by Labo ★ K effects est apparu en premier sur LABO K EFFECTS.

This kit is designed to facilitate the interconnection of an SL510 compressor or SL502 equaliser module for rack mounting. It allows you to connect the audio inputs and outputs as well as the power supply needed to operate the unit.

Available as PCB, complete kit or Built and tested.

Select your option

L’article SSL 5000 Racking Kit est apparu en premier sur LABO K EFFECTS.

This kit facilitates the interconnection of Lawo DV975 amp/summing module in order to rack it up. It allows to connect the audio inputs and outputs as well as the power needed to use the set.

Available as a kit or PCB alone.

XLR connectors and potentiometer are not included.

L’article Lawo DV975 Connection Kit est apparu en premier sur LABO K EFFECTS.